logoimagelogoname

Home

Catalog

Low Tension Magneto Parts

High Tension Magneto Parts

Rebuilt Magneto Parts

Gears

John Deere Poly Tanks and Pans

New / Reproduction John Deere Parts

Miscellaneous Ignition

Order Form

Ordering Instructions

Shipping

Warranty and Services

Contact Information

*** Represents - All parts manufactured by Lightning Magneto
 

New or Reproduction JD Parts

Prices $
magplate Magneto Plates ***
14.50
magtrips Igniter Trips ***
32.00
igniterpoints Igniter Points ***
3.50 pair
  Igniter lead wire - black coated solid conductor 1.50 ft
cambushings

Cam and Governor bushings: ***

(W-1 tool steel) (Standard or .010 under size)

17.00
  Complete Push Rods w/trip assy (1 1/2 or 3 hp) ***
100.00
  Push Rods only ***
35.00
  Push Rod Clamp for Tripper ***
40.00
pistonring1.5std Piston Rings (1 1/2 hp)  Std
22.00
oversizedring Oversized Rings (1 1/2 hp .060)
24.00
  Over-wide Piston Rings  (5/16 x 3 1/2) for worn pistons
24.00
  1 1/2hp New Oversized Pistons up to .125 oversize  w/rings ***
160.00
3pistonrings 3 hp Piston w/rings (aluminum)
200.00
wristpins1.5 Wrist pins (1 1/2 hp) ***
15.00
rodbushing1.5 Rod Bushings  (1 1/2 hp) ***
12.00
pistonring3 Piston Rings (3 hp) standard
28.00
  Piston Rings (3 hp) Overwidth 3/8 x 4 1/2
28.00
  6 hp Ring Set           6 x 5/16
44.00
  Exhaust Lever (1 1/2 hp)    ***
50.00
  Exhaust Lever (3 hp) ***
50.00
  Exhaust Lever Pivot Bolt   (1 1/2 & 3 hp) ***
14.50
adjustbolts Adjuster bolts (1 1/2 hp and 3 hp exhaust lever) ***
7.50
fuelline1.5 Fuel line complete ( 1 1/2 hp)  Brass ***
32.00
fuelline3 Fuel line complete ( 3 hp)  Brass ***
34.00
fuelline6 Fuel line complete ( 6 hp)   Brass ***
38.00
checkvalvedart Check Valve w/Dart ***
15.00
checkvalvedarts Check Value Darts ***
2.50 ea
  Reprint of instruction booklet 107 T
7.50

 

 

*** Decals-- (new vinyl computer cut on pre-spaced application tape, looks like silk screening) ***

 
decals1.5 3 piece set  1 1/2 hp ***
10.50
decals3 3 piece set    3 hp ***
12.50
  3 piece set 6 hp
17.50
speednut Speed Adjuster Nut ***
14.50
adjrod Speed Adjuster Rod ***
12.50
  Flywheel Keys 1 1/2 hp & 3 hp
7.50 ea

New one piece valves made like the later model E:

 
valve1 1/2 Valves ( 1 1/2 hp)   Intake and Exhaust same ***
18.00 ea
valves3 Valves ( 3 hp)  Intake and Exhaust same ***
20.00 ea
 

NEW 3 HP JD CYLINDER HEADS (with valves & springs - ready to install) ***

595.00
intakevalve Intake Valve Spring (1 1/2 hp & 3 hp) ***
6.50
exhaustvalvespring Exhaust Valve Spring (1 1/2 hp & 3 hp) ***
7.50
  Intake Valve Spring (6 hp)
9.50
ignspringinner Igniter spring (inner) ***
6.50
ignspringouter Igniter spring (outer) ***
6.50
rockerarmspring Rocker Arm Spring (1 1/2 hp & 3 hp) ***
7.50
rockerarmspring Rocker Arm Spring (6 hp) ***
12.00
igntripspring Igniter Trip Spring ***
6.50
needlevalvespring Needle valve spring ***
3.00
govspringextern Governor Spring External ***
5.00
govspringint Governor Spring Internal ***
5.00
springset Spring set - 10 piece (1 1/2 hp & 3 hp) ***
55.00
lhnutswashers LH Governor nuts and washers (new) ***
5.00
rodbearing1.5 Rod Bearings  (1 1/2 hp) ***
25.00
rodbearings3 Rod Bearings  (3 hp) ***
29.00
mainbearingset Main Bearing Set  - 4 piece 1 1/2 hp New Design ***
75.00
  Main Bearing Set  - 4 piece 3 hp New Design ***
85.00
needlevalve1.53 Needle valve (1 1/2 & 3 hp) ***
15.00
  Needle, seat, spring assembly ***
32.00
needlevalve1.53 Needle valve seat  (1 1/2 & 3 hp) ***
15.00
needlevalve6 Needle valve (6 hp) ***
17.00
needlevalveseat6 Needle valve seat  (6 hp) ***
15.00
  Choke Plate  (1 1/2 & 3 hp) ***
5.00
  Choke Plate Spring (1 1/2 & 3 hp) ***
3.00
  Choke Plate with spring & screw kit
10.00
muffler1.53 Muffler (1 1/2hp and 3 hp)
45.00
  1 1/2 3 hp Top cover bolts (high end/custom made) set of 3
20.00
  Expansion plug (under the magneto)
1.25
 

Plugs - NEW - steel ***

Oil - Gas - Water

10.00
  Vented crankcase replacement kit
10.00
 

Latch out adjustment screw with locknut

7.50

 

Gaskets:

oilpan1.5 Oil Pan (1 1/2hp) 2 required ***
4.50
govcover1.5 Governor Cover (1 1/2hp) ***
5.00
topcover1.5 Top Cover (1 1/2hp) ***
5.00
maggasket Magneto Gasket - 1 1/2, 3 & 6 hp ***
3.50
magfelt Magneto Felt (goes on outside) 1 1/2, 3, & 6 hp ***
3.50
  Mag Gasket & Felt Set ***
7.00
headgasketgraph Head Gasket Graphite (1 1/2hp) with fire ring (new) ***
14.00
  Igniter Gasket Copper Sandwich ***
7.50
oilpan3 Oil Pan (3 hp) 2 required ***
6.50
gov3 Governor Cover (3 hp) ***
6.00
topcover3 Top Cover (3 hp) ***
6.50
headgasket3 Head Gasket - 3 hp with fire ring ***
22.00
carb3 Carburetor Gasket (3 hp) ***
1.50
gasket1.5

Gasket Sets (1 1/2 hp, includes mag felt)   8 piece set ***

Now with copper ignitor gasket

45.00
gasketset3

Gasket Sets (3 hp, includes mag felt)   9 piece set ***

Now with copper ignitor gasket

60.00
NEW Head Gasket (6 hp) w/ fire ring
32.00
   

New Rebuilt Parts

 
  New Governor Bodies  ***
135.00
  New Governor Complete ***
180.00
  Rebuilt Governor  (1 1/2, 3 hp) complete (if available) ***
130.00
  Governor weights ***
22.00 ea
  New Governor 6 hp ***
250.00
  Rebuilt original igniters ***
235.00
  New Ignitors ***
270.00
  New Ignitor bodies ***
115.00
  Hammer ***
55.00
  Moveable Shaft w/point ***
32.00
  Anvil Clamp w/spring ***
30.00
  Insulated Shaft w/point & Mica ***
15.00
  Ignitor Mica set ***
3.50
  Ignitor Kit - Complete service pkg ***
80.00
   

Services Offered: I can repair your broken JD Governor gears and replace the threaded end as required.

Threaded end  40.00 replace the gear 55.00

Helicoli mag base bolts 20.00

Make and install new base inserts for JD (E) mags 120.00

 

Used JD 1 1/2 hp Parts

Call for availability

  Flywheel Crank side
125.00
  Flywheel Off side
50.00
  Head with valves (no needle and seat)
85.00
  Pistons standard
75.00
  Pistons oversized - used                 Sometimes available
95.00
  Main Bearing Caps
10.00
  Connecting rods
25.00
  Cam Shafts
50.00
  Governor Cover
35.00
  Top Cover (no vent)
50.00
  Top Cover (with vent)
85.00
  Sub-base
50.00
  Push Rods with trips
80.00
  Oil Plugs
20.00
  Pulleys - New Reproductions
55.00
  Pulleys - Steel
65. to 80.
  Pulleys - Cast Iron
Call
  Cam Follower
20.00
Used blocks with good bore or new sleeves - Call for availability.
 
Some 3 hp stuff on hand call with needs.  

 

Cam Gears

  1 1/2 hp (good used)
60.00
  3 hp (new) ***
100.00
  6 hp (new) ***
125.00

NEW - CAM Shafts for sparkplug engines

E34R with bushing
110.00

NEW - CAM Shafts for ignitor engines

E102R with bushing
85.00
     

Back to top